Tips For Troubleshooting Your Home Alarm System In Lima
System glitches and false alarms can be aggravating, and more importantly, might prevent your home security system from doing its job effectively. Fortunately, most troubles, from false alarms to dead batteries, are easy to fix. Take a look at our recommendations for troubleshooting your home alarm system in Lima. We’ll help keep your family members safe and your system operating the way it should.
Test Your Home Security System In Lima
One sensible way to troubleshoot your property’s security is to test it! Modern systems let you put them in test mode to avoid triggering an emergency response. After moving to test mode, take these steps:
- Turn on your system as you normally would when leaving.
- Open a window or door that uses a contact sensor, or test other devices. Shut the window or door so it doesn’t trigger the alarm as you switch the system back on.
- Allow the alarm to resonate for 60 seconds to make sure a signal is delivered to the security provider and an entry is made in the alarm activity log.
- Proceed to test equipment as you wish
- Review the systems’s activity log to validate functionality.
No need to worry, monitoring specialists can see that your system is being tested. Just make sure to switch out of test mode when you’re done. It’s smart to test every other month or anytime you make changes to your home’s internet or phone provider.
Evaluate The Placement And State Of Motion Detectors
Although an essential element of your alarm system, motion sensors are notorious for false alarms. You can help prevent them with a few straightforward troubleshooting steps.
- Perform a visual check. Are there things that could move within the sensor’s detection zone, like a curtain taken by a breeze?
- Is the sensor dirty? Cobwebs, dirt, and debris can result in malfunctions. Ensure the sensor is clean.
- Does the motion detector offer pet immunity you can enable? Some sensors can be configured to ignore pets weighing as much as 100 pounds.
- When was the battery last replaced? Low batteries can impact performance or result in false alarms.
- Is a heat source impairing the sensor? Too much heat from sunlight or a fireplace can trigger an alarm.
Keep Batteries Ready And Pay Attention To Low Battery Notifications
One helpful perk of the latest home security systems is that they’ll alert you when batteries are running low. If your system uses a control panel or smartphone app, you’ll often discover notifications there. Depending on your system, you could hear an intermittent beep when batteries are getting low.
Contact sensors, motion detectors, smoke detectors, and other wireless tools have batteries that will have to be replaced every year or two. It’s wise to keep batteries on hand and set a replacement schedule. Many systems also include a rechargeable backup battery for the main control panel. This backup battery keeps your system functioning if your power goes out and should recharge itself once the electricity is working again. If it doesn’t, you should replace it.
Troubleshooting Is Simple With ADT Home Security In Lima
As the foremost name in home security, ADT designs systems that offer superior protection and functionality. Switching to test mode is easy through MyADT.com or the ADT+ app, and you’ll always be sent notifications when a sensor battery is nearing depletion. Reach out to Secure24 Alarm Systems, an authorized ADT dealer, to find out more and design a system ideal for your Lima home and family. Dial (419) 359-8743 or complete our form today!